Resumo Ginkgo biloba é um fitoterápico tradicional da medicina chinesa que contém vários componentes que contribuem para suas notáveis bioatividades. Variações sazonais, meteorológicos e de plantio do solo sobre os teores fitoquímicos em folhas de G. biloba, devido aos efeitos do crescimento meteorológico e parâmetros do solo, foram investigadas neste estudo. As folhas de G. biloba foram coletadas em diferentes meses e na província de Zhejiang, os teores de flavonas (quercetina, kaempferol e isorhamnetina) e lactonas terpênicas (bilobalida, ginkgolídeos A, B e C) foram quantificados por Cromatografia Líquida de Alta Eficiência (CLAE) e pelo método do detector de dispersão da luz por evaporação. Os métodos estabelecidos foram validados com boa linearidade, precisão, repetibilidade, estabilidade e recuperação. Uma análise abrangente sugeriu que o tempo de colheita adequado para G. biloba foi em outubro na província de Zhejiang. O resultado da análise de correlação com fatores meteorológicos mostra que a temperatura e a precipitação não têm efeito significativo sobre os principais componentes de G. biloba. Além disso, o tipo e composição (Mn e Zn) do solo apresentaram efeito significativo sobre o teor de flavonoides e lactonas terpênicas. Este estudo enriqueceu o conhecimento sobre o valor de desenvolvimento e utilização das folhas de G. biloba e foi útil para determinar o melhor tempo de colheita e condição de crescimento.

Abstract Ginkgo biloba is a traditional Chinese herbal medicine containing multiple components that contribute to its notable bioactivities. Variations of seasonal, meteorological and planting soil on the phytochemicals contents in G. biloba leaves due to the effects of growth meteorological and soil parameters were investigated in this study. The leaves of G. biloba were collected from different months and place in Zhejiang province, the contents of flavones (quercetin, kaempferol and isorhamnetin) and terpene lactones (bilobalide, ginkgolides A, B and C) were quantified by high performance liquid chromatography (HPLC) and the evaporative light scattering detector (ELSD) method. The established methods were validated with good linearity, precision, repeatability, stability, and recovery. Comprehensive analysis suggested the proper harvest time for G. biloba was in October of Zhejiang province. The result of correlation analysis with meteorological factors shows that the temperature and precipitation have non-significant effect on the main components of G. biloba. In addition, the type and content (Mn and Zn) of the soil showed significantly effect on the content of flavonoids and terpene lactones. This study enriched the knowledge on the development and utilization value of the G. biloba leaves and was useful for determining the optimal harvest time and growing condition.

Mining method selection is one of the most important decisions to be made by mining engineers. To solve the decision-making problem regarding selection of the optimal longwall mining method for thin coal seams, we propose an approach that combines Monte Carlo simulation and the conventional analytic hierarchy process (AHP). Economic, technical, and ergonomic factors are taken into consideration in the process. With this approach, the confidence level of each method's score, as calculated by AHP, is determined by Monte Carlo simulation. The proposed approach is applied to a panel in Liangshuijing coal mine in China and the appropriate mining methods for this panel are ranked.

The hot deformation behaviour of Nb-Ti microalloyed high-strength steel was investigated. Hot compression tests were conducted in the temperature range 900 to 1100°C under strain rates of 0.1, 1, and 5 s-1. Dynamic recrystallization (DRX) occurs as the main flow softening mechanism at high temperature and low strain rate. The hot deformation activation energy was calculated to be about 404 699 J/mol. The constitutive equation was developed to describe the relationship between peak stress, strain rate, and deformation temperature. The characteristics of DRX at different deformation conditions were extracted from the stress-strain curves using the work hardening parameter. The Cingara-McQueen equation was developed to predict the flow curves up to the peak strain. The processing maps were obtained on the basis of a dynamic materials model. The results predict an instability region in the temperature range 1010 to 1100°C when the strain rate exceeds 0.78 s-1.

The static recrystallization behaviour of Ti-Nb microalloyed high-strength steel during hot deformation was studied by conducting double-hit hot compression experiments using a Gleeble-3500 thermomechanical simulator. The effects of deformation temperature, strain rate, strain, and initial austenite grain size on the static recrystallization fraction are discussed. The static recrystallization kinetics were modelled, and the results show that the static recrystallization fraction increased with deformation temperature, strain rate, and strain and interpass time. The static recrystallization activation energy Qs was 326.05 kJ mol-1. Comparison of the experimental results and predicted results indicates that the effects of deformation parameters on the static recrystallization in multistage hot deformation are significant. The predicted results are in good agreement with the experimental results.

The effects of finishing temperature, cooling method, and coiling temperature on the mechanical properties and microstructure of DP600 dual-phase steel produced by compact strip production (CSP) were investigated. Optical microscopy, scanning electron microscopy, transmission electron microscopy, and tensile testing were used to study the microstructure and mechanical properties. The results show that the appropriate microstructure is acquired by decreasing the finishing temperature, accelerated cooling and stage-cooling method, and controlling the coiling temperature below the start temperature of martensite transformation of 352°C. The DP steel produced by CSP contains 81% ferrite and 19% martensite, and the yield strength, tensile strength, and elongation are 350 MPa, 680 MPa, and 29.5%, respectively. The fine polygonal ferrite grain, high density of dislocations, and martensitic laths among the ferrite grains contribute to the excellent microstructure and mechanical properties.

Prostate cancer is relatively unique to man. There is no naturally occurring prostate cancer in the mouse. Pre-clinical studies involve the establishment of a genetically engineered mouse prostate cancer model with features close to those of the human situation. A new knock-in mouse adenocarcinoma prostate (KIMAP) model was established, which showed close-to-human kinetics of tumor development. In order to determine if the similar kinetics is associated with heterogeneous tumor architecture similar to the human situation, we utilized a new mouse histological grading system (Gleason analogous grading system) similar to the Gleason human grading system and flow cytometry DNA analysis to measure and compare the adenocarcinoma of the KIMAP model with human prostate cancer. Sixty KIMAP prostate cancer samples from 60 mice were measured and compared with human prostate cancer. Flow cytometry DNA analysis was performed on malignant prostate tissues obtained from KIMAP models. Mice with prostate cancer from KIMAP models showed a 53.3% compound histological score rate, which was close to the human clinical average (50%) and showed a significant correlation with age (P = 0.001). Flow cytometry analyses demonstrated that most KIMAP tumor tissues were diploid, analogous to the human situation. The similarities of the KIMAP mouse model with tumors of the human prostate suggest the use of this experimental model to complement studies of human prostate cancer.